Setting The Menu - Sony HSC300RF Operation Manual

<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
Menu Description
USER This menu includes often-used menu pages
selected from among the OPERATION, PAINT,
MAINTENANCE, FILE, and DIAGNOSIS menus.
Changing, adding, and deleting pages can be
performed with the USER MENU CUSTOMIZE
menu (page 24).
USER MENU This menu allows you to edit the USER menu.
CUSTOMIZE For details, see "Editing the USER Menu" on
page 24.
ALL This menu permits you to control all items of the
OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu, and
DIAGNOSIS menu as a single menu.
OPERATION This menu contains items for camera operators
to operate the camera. It mainly permits
viewfinder, intercom, and switch settings.
PAINT This menu contains items for making detailed
image adjustments while using a waveform
monitor to monitor the waveforms output from the
camera. Support of a video engineer is usually
required to use this menu.
Although you can also use an external control
device to set the items on this menu, the menu is
effective when using the camera by itself
outdoors.
MAINTENANCE This menu contains items for performing camera
maintenance operations, such as changing the
system or setting infrequently used "paint" items.
FILE This menu is for performing file operations, such
as writing or clearing the reference file.
DIAGNOSIS This menu enables you to confirm the self-
diagnostic information.
To disable the "TOP" indication
Turn the power off then on again, or set the DISPLAY/MENU
switch to MENU while holding the STATUS/CANCEL switch
pressed toward CANCEL. This disables the TOP selection.

Setting the Menu

To select a menu on the TOP MENU screen
Rotate the menu control knob to align the pointer with the
desired menu indication then push on the knob.
The CONTENTS page (page No. 00) or the last accessed
page of the selected menu is displayed.
To select a page from a CONTENTS page
Rotate the menu control knob to align the pointer with the
desired page indication then push on the menu control knob.
If the screen can be scrolled, arrows will indicate
the direction for scrolling.
CONTENTS
01.<VF DISPLAY>
02.<'!'IND>
03.<VF MARKER>
Pointer
04.<VF DETAIL>
05.<FOCUS ASSIST>
06.<ZEBRA>
07.<CURSOR>
08.<VF OUT>
09.<SWITCH ASSIGN1>
10.<SWITCH ASSIGN2>
The selected page is displayed.
<VF DETAIL>
VF DETAIL :
CRISP :
FREQUENCY:
FLICKER :
To change the displayed page
1
Check that the pointer is located at the left of the page
number then push on the menu control knob.
The , arrow changes to a flashing ? question mark.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
2
Rotate the menu control knob to flip through the
pages, and push on the knob when the desired page
is displayed.
The ? question mark changes back to the , arrow. Items
on the page can now be selected and changed.
To return to the TOP MENU screen
Align the pointer with "TOP" at the top right of the menu
page then push on the menu control knob.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
To change a menu item setting
If a question mark is flashing at the left of the page number,
push on the menu control knob to change it to the pointer.
Items on the page can now be selected and changed.
1
Align the pointer with the desired item, then push on
the menu control knob.
The , arrow changes to a flashing ? question mark.
00 TOP
Page No.
04 TOP
ON 25%
0
9M
OFF
Flashing
? 04 TOP
ON 25%
: 0
9M
: OFF
04 TOP
ON 25%
: 0
9M
: OFF
Menus
23