Changing The Engine Oil - Toro 74997 Operator's Manual

A
B
C D
F
G
H I
Figure 52

Changing the Engine Oil

Service Interval: After the first 8 hours
Note: Dispose of the used oil at a recycling center.
G029644
1. Start the engine and let it run for 5 minutes.
2. Park the machine so that the rear is slightly lower than
3. Disengage the blade-control switch (PTO), move the
E
4. Shut off the engine, remove the key, and wait for all
J
G027659
40
Every 100 hours (more often in dirty or dusty
conditions).
Note: This warms the oil so that it drains better.
the front to ensure that the oil drains completely.
motion-control levers to the N
and set the parking brake.
moving parts to stop before leaving the operating
position (Figure 53).
Figure 53
- position,
EUTRAL LOCK
G029644