Specifications - Toro 74997 Operator's Manual

Blade-Control Switch (PTO)
Use the blade-control switch (PTO) to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades,
push the blade-control switch (PTO) down or move a
motion-control lever into the N
Ignition Switch
This switch is used to start the mower engine and has 3
positions: S , R , and O
TART UN
Motion-Control Levers
Use the motion-control levers to drive the machine forward
and reverse, and to turn either direction.

Specifications

Note: Specifications and design are subject to change without notice.
Width
Without Deck
Deflector Up
Deflector Down
Length
Roll Bar Up
Roll Bar Down
Height
Roll Bar Up
179 cm (71 inches)
Weight
Model
74997
74998
- position.
EUTRAL LOCK
.
FF
60-inch Deck
135 cm (53 inches)
157 cm (62 inches)
192 cm (76 inches)
60-inch Deck
211 cm (83 inches)
215 cm (85 inches)
Neutral-Lock Position
Use the N -
EUTRAL LOCK
system to engage and to determine the N
Fuel-Shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
72-inch Deck
150 cm (59 inches)
187 cm (74 inches)
222 cm (88 inches)
72-inch Deck
219 cm (86 inches)
223 cm (88 inches)
Roll Bar - Down
127.8 cm (50.3 inches)
Weight
621 kg (1,370 lb)
653 kg (1,440 lb)
15
position with the safety-interlock
position.
EUTRAL