Fitting A Plinth Facing - Miele T 4859 Ci SUPERTRONIC Operating Instructions Manual

Fitting a plinth facing

The gap between the lower edge of the
tumble dryer plinth and the floor can be
closed up using a suitable kitchen
furniture plinth facing.
The tumble dryer plinth has a special
groove in which a plinth facing can be
fitted.
Plinth facing dimensions
Length: 592 - 596 mm
Thickness: 8 mm
Height (H): The plinth facing height
must be calculated after aligning the
height of the appliance with the screw
feet or after fitting the raising kit(s).
Installation
^ Calculate height (H) from the floor up
into the groove (on the underside of
the tumble dryer).
^ Cut the plinth facing to size.
^ Slide it into the groove.
Installation and connection
Useful tip:
If the dryer is fitted on a raising kit, you
can use double-sided adhesive tape on
the back of the plinth facing to secure it
to the raising kit.
61