Mac Filter - D-Link DSL-2540U User Manual

DSL-2540U ADSL/Ethernet Router with Built-in Switch
User Manual

MAC Filter

The MAC-address-based filtering allows forwarding and blocking traffic subject to the source and
destination MAC addresses.
!
MAC-address-based filtering is active only when the device is configured as a transparent
bridge (the Bridge mode).
On the Configuration tab, you can select the operating mode of the MAC filter. Select the Allow
value from the Action drop-down list to allow traffic affected by the rules from the MAC
addresses tab and block the other traffic. Select the Deny value from the drop-down list to block
only traffic affected by the rules from the MAC addresses tab.
Figure 71. The Firewall / MAC filter page. The Configuration tab.
To create a new rule, proceed to the MAC addresses tab and click the Add button.
Figure 72. The Firewall / MAC-filter page. The MAC-addresses tab.
Page 76 of 86
Configuring via Web-based Interface