Firmware Upgrade - D-Link DSL-2540U User Manual

DSL-2540U ADSL/Ethernet Router with Built-in Switch
User Manual

Firmware Upgrade

On the System / Firmware upgrade page, you can upgrade the firmware of the router.
The current version of the router's firmware is displayed in the Firmware version field on the
Start page. If you need to install a newer version of the firmware, follow the next steps:
!
Attention! Do not turn off the router before the firmware upgrade is completed. This may
cause the device breakdown.
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Choose/Browse
the new firmware file.
3. Click the Update button to upgrade the firmware of the router.
4. Wait until the router is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login (admin) and the current password.
6. Select the Factory line in the top-page menu displayed when the mouse pointer is over the
System caption.
7. Wait until the router is rebooted. Log into the web-based interface, using the default IP
address, login and password (192.168.1.1, admin, admin).
2 The name of the button depends upon the web browser that you use.
Figure 81. The System / Firmware upgrade page.
2 button on the System / Firmware upgrade page to locate
Page 84 of 86
Configuring via Web-based Interface