Installing The Software; Connecting The Instruments - HP 3330B Software Manual

Installing the software

From the DOS prompt create a directory
MD HPIBPROG [ret]
Go to the new created directory.
CD HPIBPROG[ret]
Copy the .exe program to this directory.
Use Bode.exe for HP Card
Use BodeNI.exe for the National Instruments Card.

Connecting the Instruments

• The RF connection is optional.
The output of the 3330B can be routed to the rear alt. Output Triaxial connector
or to the front panel. This depends on the internal wiring of the 3330B.
Connect the 1MHz ref connectors using a bnc cable.
Connect the 20-33 MHz connector using a bnc cable.
Connect the Mult-Unit cable via the HP 11235 adapter to the interface card in the
computer. The wiring of this connector is provided in appendix A