Table of Contents
Advertisement
Introduction
This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.
This debris blower is mounted to a ride-on machine and
is intended to be used by professional, hired operators
in commercial applications. It is primarily designed to
use wind power to quickly clear large areas of unwanted
debris on well-maintained lawns in parks, sports fields,
and on commercial grounds.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a dealer,
or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Write the
numbers in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 1),
which signals a hazard that may cause serious injury
or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
© 2012-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Before Operating ................................................. 3
While Operating................................................... 3
Maintenance......................................................... 3
Safety and Instructional Decals ............................. 4
Setup ........................................................................... 6
Frame............................................................... 7
2 Mounting the Castor Wheels .............................. 8
3 Lowering the Stand ............................................ 8
Unit.................................................................. 9
5 Installing the Drive Shaft.................................... 9
6 Grease the Blower ........................................... 10
Product Overview ...................................................... 10
Specifications ..................................................... 10
Operation................................................................... 11
Transporting the Blower ..................................... 11
Adjusting the Discharge Opening ....................... 11
Operating Tips ................................................... 11
Maintenance............................................................... 12
Lubrication......................................................... 12
Adjusting the Blower Belt ................................... 13
Storage....................................................................... 14
Troubleshooting......................................................... 15
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
Advertisement
Table of Contents
