Torquing Fasteners - Toro 08759 Operator's Manual

Torquing Fasteners

If the blower is ever disassembled, the following
fasteners must be torqued as specified. Also, apply
Loctite 242 to the threads before installing.
• The set screws securing the motor and fan shaft
couplers (Figure 10) must be torqued to 58 to 82
in-lb.
• The fan shaft bearing set screws (Figure 11) must be
torqued to 58 to 82 in-lb.
G003816
1. Set screw
• The fan mounting nut (Figure 12) must be torqued
to 500 ft-lb.
1
G003817
1. Fan mounting nut
1
Figure 11
Figure 12
11