Indicator Lights - Toro 02750 Operator's Manual

Fuel Gauge
The fuel gauge shows the amount of fuel in the tank
17).
E
Figure 17
Hour Meter
The hour meter shows the total hours that the machine has
been operated (Figure 3).

Indicator Lights

Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine preheat
indicator light will illuminate
plugs.
Important: Attempting to start a cold engine before
using the pre-heat can cause unnecessary wear to the
battery.
Figure 18
Transmission-Neutral-Indicator Light
The transmission-neutral-indicator light
illuminates when the travel control pedal is in the N
position and the ignition key is turned to position I.
Note: The parking brake must be engaged for the
transmission neutral indicator light to illuminate.
Figure 19
FUEL
F
G014558
(Figure 18) and heat the glow
(Figure 19)
EUTRAL
Cutting-Unit-Drive-Switch Indicator Light
(Figure The cutting-unit-drive-switch indicator light
illuminates when the cutting unit drive switch is in the O
position and the ignition key is turned to position I.
Parking-Brake-Indicator Light
The parking-brake-indicator light
when the parking brake is engaged and the ignition key is
turned to position I.
Hydraulic-Transmission-Filter-Indicator Light
The hydraulic-transmission-filter-indicator light
illuminates when the transmission filter element is blocked.
Note: The engine must be running for the indicator light to
illuminate. The indicator light may illuminate briefly when
the hydraulic oil is cold.
19
(Figure
Figure 20
(Figure 21) illuminates
Figure 21
(Figure
Figure 22
20)
FF
22)