Table of Contents
Advertisement
This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
Introduction
This rotary-blade lawn cutting deck is mounted to a ride-on
machine and is intended to be used by professional, hired
operators in commercial applications. It is primarily designed
for cutting grass on well-maintained lawns in parks, sports
fields, and on commercial grounds. It is not designed for
cutting brush, mowing grass and other growth alongside
highways, or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers
of your product ready. The model and serial numbers are
stamped on a plate on the rear of the cutting unit, under the
cover. Write the numbers in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
© 2014-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
(Figure
Figure 1
Contents
Safety ........................................................................... 3
Safety and Instructional Decals ................................. 3
Setup ............................................................................ 4
3500-D and 3500-G only) ..................................... 4
Adjusting the Height-of-Cut ..................................... 4
Adjusting the Roller Scraper (Optional) ...................... 5
Installing the Mulching Baffle (Optional) .................... 5
Product Overview .......................................................... 6
Specifications ......................................................... 6
Dimensions and Weights (approx.)............................. 6
Attachments/Accessories......................................... 6
Operation ..................................................................... 6
Selecting a Blade...................................................... 6
Operating Tips ....................................................... 7
Maintenance .................................................................. 9
Recommended Maintenance Schedule(s) ....................... 9
only) .................................................................. 9
Greasing the Bearings .............................................. 9
Unit ..................................................................10
Unit ..................................................................10
Servicing the Blade Plane.........................................10
Removing the Cutter Blade ......................................11
Inspecting and Sharpening the Blade .........................12
Checking the Blade Stopping Time............................12
Servicing the Front Roller ........................................12
Storage ........................................................................13
1),
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
Advertisement
Table of Contents
