Maintenance; Recommended Maintenance; Schedule(S) - Toro 71209 Operator's Manual

Hide thumbs Also See for 71209:
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the rst 5 operating
hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Before storage
Yearly
Important: Refer to your engine operator's manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do
any maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Check the brakes.
• Check the cutting blade.
• Clean the mower housing.
• Check the safety interlock system.
• Grease the chassis (more often in dirty or dusty conditions).
• Service the foam air cleaner (more frequently in dirty or dusty conditions).
• Check the spark plug.
• Check the tire pressure.
• Change the engine oil (more frequently when operating under a heavy
load or at high temperatures).
• Check the battery electrolyte.
• Service the paper air cleaner (more frequently in dirty or dusty conditions).
• Replace the spark plug.
• Replace the fuel lter.
• Clean the cooling system (more frequently in dirty or dusty conditions).
• Perform all of the maintenance procedures listed above.
• Check the belts for wear/cracks.
• Drain the fuel tank.
• Paint chipped surfaces.
• Charge the battery and disconnect the cables.
• Check the safety interlock system.
• Check the brakes.
• Check the spark plug.
• Check the battery electrolyte.
• Check the tire pressure.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl 320

Table of Contents