Removing The System Fans - Dell Inspiron 9200 Service Manual

Back to Contents Page
System Fans
Dell™ Inspiron™ 9200
Removing the System Fans
Replacing the System Fans
Removing the System Fans
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in "Before Working Inside Your
2. Remove the hinge cover.
3. Remove the keyboard.
4. Remove the display assembly.
5. Remove the palm rest.
NOTE: This computer has two system fans. One is for the processor (the larger one on the right side) and the other is for the graphics card (the smaller
one on the left side).
6. Remove the two M2.5 x 5-mm screws from the each of the fans, then remove the connector that connects each fan to the system board.
7. Lift each fan out of the computer.
1 fan
2 M2.5 x 5 screws (2)
3 system board connector
Computer."