MIN
C
A
Recommended oil:
YAMALUBE 4 cycle oil or
SAE 10W30
Engine oil capacity:
1.0 L, 1000 cc
(1.0 US qt)
Oil change quantity:
1.0 L, 1000 cc
(1.0 US qt)
JW7
PRE-OPERATION CHECKS
Y-514
B
MAX
A
Y-28
Y-515
ENGINE OIL
With the utility vehicle parked on
level ground, remove the dipstick
and make sure the engine oil is
between the MIN and MAX marks
(the crosshatched area on the end
of the dipstick).
å Oil level dipstick
∫ Maximum oil level
ç Safe operating range
If the oil level is below the MIN mark
on the dipstick, add oil through the
oil filler hole until the oil level is
between the MIN and MAX marks.
å Oil filler hole
NOTICE
Engine damage can result.
Use care not to fill past the MAX
l
dipstick mark, and be sure no
foreign material enters the
crankcase.
Use care not to get oil on the
l
starter belt.
TIP
The distance between the dipstick
marks represents approx. 1/2 L
(1/2 US qt) of oil.
TIP
Recommended engine oil
classification: API Service SE, SF, or
SG. Engine oils labeled "Energy
Conserving II" are recommended.
1
2
3
4
5
6
7
8
9
10
11
6-3