Change Operating Mode - Motorola FX9500 User Manual

4 - 24 FX9500 RFID Reader User Guide

Change Operating Mode

Operating Mode Screen
Figure 4-24
The reader supports the following operational modes:
•
Active Mode - Reader is continuously attempting to singulate tags and automatically reports any singulated
tag via an asynchronous event notification on the event channel.
•
Stand By Mode - Reader is not transmitting any energy, unless processing a tag related command. The RF
transmitter is enabled at the beginning of the command processing, protocol operations required for the
command are performed and then the RF transmitter is turned back off.
Use Change Operating Mode to configure the operational mode of the reader.