Canon ImageRUNNER 2545i Sending And Facsimile Manual page 297

# 0839
Cause
Remedy
#0841
Cause
Remedy 1 Disable data transmissions using SSL encryption by setting <Allow SSL (SMTP
Remedy 2 Change the mail server settings to add a common encryption algorithm that is
#0842
Cause 1
Remedy 1 Change the mail server settings not to request a client certificate.
Remedy 2 Disable data transmissions using SSL encryption by setting <Allow SSL (SMTP
9
Cause 2
Remedy
#0844
Cause
Remedy 1 Check the settings for SSL-encrypted communications on the POP server.
Remedy 2 Disable SSL-encryption for communications with the POP server by setting
9-22
Self-diagnostic Display
The user name or password for the SMTP Authentication is incorrect.
Check that User and Password on the Authentication/Encryption Settings
screen are set correctly. (See Chapter 3, "Setting up the Machine for Your
Network Environment," in the System Settings Guide.)
An error occurred when sending SSL-encrypted data because the machine and
the mail server do not have a common encryption algorithm.
Send)> in the E-mail/I-Fax setting to 'Off'. (See Chapter 3, "Setting up the
Machine for Your Network Environment," in the System Settings Guide.)
available both on the machine and the mail server.
An error occurred when sending SSL-encrypted data because the mail server
requested a client certification. (A client certification is unsupported on the
machine.)
Send)> in the E-mail/I-Fax setting to 'Off'. (See Chapter 3, "Setting up the
Machine for Your Network Environment," in the System Settings Guide.)
The machine detected a problem with the SSL server certificate and the
communication failed.
Check the SSL server certificate. For information on the certificate verification,
see Chapter 4, "Customizing Settings," in the Remote UI Guide.
POP authentication failed and a transmission error occurred due to
SSL-encrypted communication error when using POP before SMTP.
<Allow SSL (POP)> in the E-mail/I-Fax setting to 'Off'. (See Chapter 3, "Setting
up the Machine for Your Network Environment," in the System Settings Guide.)