Canon ImageRUNNER 2545i Sending And Facsimile Manual page 82

7
● If you want to check or change the specified destination:
❑
Press [Details] ➞ check or change the destination's information ➞ press [OK].
For help, see step 4 in "Sending an E-Mail Message," on p. 2-2.
● If you want to delete the specified destination:
❑
Press [Erase].
For help, see step 4 in "Sending an E-Mail Message," on p. 2-2.
NOTE
If Confirm Entered Fax Numbers in Restrict the Send Function is set to 'On', you
should enter the fax number again for confirmation. Enter the fax number you entered
in step 5 ➞ press [OK]. (See Chapter 4, "Setting the Send Function," in the System
Settings Guide.)
8
9
Press (Start) to start scanning your originals.
To cancel scanning, press [Cancel] or
If the original is placed on the platen glass, follow the instructions that appear on the
touch panel display ➞ press
complete, press [Done].
The scanned data is sent to the specified destination when scanning is complete.
Press [OK].
The specified destination appears on the
top screen.
Press [Scan Settings] to specify
the scan settings you require.
For more information, see Chapter 3,
"Specifying the Scan Settings."
(Stop).
(Start) once for each original. When scanning is
Advanced Sending Methods
2
2-55