Panasonic WJ-ND300A/G Setup Instructions page 52

Perform the settings for command alarm [Command Alarm]
Set event actions at a command alarm occurrence for each camera channel.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click "Command Alarm" to display the
"Command Alarm" window.
52
Step 1
Perform the settings for the following items for each
command alarm channel.
[REC CAM]
Performs the settings for a camera channel used for
recording.
[PRESET]
Enter a preset position (blank, 1-256) to which the cam-
era will move at an alarm occurrence.
When no position is entered (blank), the camera does
not move to any preset position.
[Output Terminal]
Select the output terminal (--, TRM1-TRM16) that out-
puts alarm signals at an alarm occurrence. When "--" is
selected, alarm signals will not be output.
Step 2
Click the [SET] button after completing the settings.