Table of Contents
Advertisement
CAUTION
This telephone
is for use "tone dialing
system" only.
If you have a pulse dialing line, you can't
use this cordless telephone.
SECURITY
CODES
Your cordless telephone works only when the same security code is selected,
from 65,536 possibilities,
for both the handset and base station. This prevents
unauthorized
use of your telephone
line by another cordless telephone.
IMPORTANT:
The following events may cause the security code to be erased and require
resetting:
I
After the handset battery is replaced or exhausted
I
After a power interruption
To reset your security
code
/
1.
2.
Place the handset in the base station
cradle.
Within 8 seconds, press ~
on the base station.
The IN USE indicator blinks. A beep
sounds and the security code is set.
The IN USE indicator then goes off.
If the security code cannot be set, the
IN USE indicator continues to blink for
about 4 minutes. When this occurs,
PAGE/FIND
repeat the steps above.
If you experience
difficulty in resetting the
security code, first disconnect
the AC
Q
adaptor from the unit, reconnect it, and
then try again.
-7-
Advertisement
Table of Contents
