Siemens MK880FQ1 Operating Instructions Manual page 27

Important information
All parts of the bowl, including acces-
sories (5–7) and the tools (8–16), except
the gears of the stirrer, are dishwasher-
proof.
Do not wedge plastic parts in the dishwasher
as they could warp.
The stirrer can be taken apart for cleaning.

Fig.
Carefully remove whisk from the holder

and remove the lid.
Carefully clean gears with a brush.

The whisk can be cleaned in the dishwasher.

Assemble after cleaning.

Cleaning the dicer
The base holder (18b) is dishwasher-proof.
Do not clean any other parts in the
dishwasher, the blades will become blunt!
Before cleaning the dicer, disassemble it:

Fig.
Press out the 4 catches and remove

the slicing disc.
Take blade insert out of the base holder.

Remove food remnants from the cutting

grid using the cutting grid cleaner.
Clean base holder in the dishwasher.

Prerinse all other parts under running water.
Clean parts with a brush.
Cleaning the blender
It is recommended to clean the blender
immediately after use.
This will prevent residue from drying on and
attacking the plastic (e.g. by essential oils in
herbs).
The blender jug, lid and funnel are dishwasher-
proof.
Do not clean blade insert in the dishwasher,
but under running water. Do not leave in water!
Tip: Pour a little water and washing-up liquid
into the attached blender. Switch on at setting
M for several seconds. Pour out the water
and rinse the blender with clean water.
Taking the blender apart

Fig.
Upon the wings, rotate the blade insert

in an anti-clockwise direction.
The blade insert is released.
Take blade insert out and remove

sealing ring.
Putting the blender together
Apply sealing ring on blade insert.

Insert blade insert from below into

blender jug.
Firmly screw on the blade insert

by the wings in a clockwise direction.
Rotate the blade insert at least until
a wing covers the mark on the blender
jug (position –> Fig.
Cleaning the citrus press
All parts are dishwasher-proof. It is recommen-
ded to rinse the pressing cone immediately
after use on all sides under running water.
Doing so prevents residue from drying on.
Cleaning the universal cutter
It is recommended to clean the universal cutter
immediately after use. This will prevent residue
from drying on and attacking the plastic
(e.g. by essential oils in herbs).
The lid is dishwasher-proof.
Do not clean jug and drive in the dishwasher,
but under running water using a brush.
Do not leave in water!
To dry, place the jug and drive face up.
Tip: Pour a little water and washing-up liquid in
the universal cutter. Place universal cutter on
base unit. Switch on at setting M for several
seconds. Remove the universal cutter. Pour
out the water and rinse with clean water.
en

-6).
27