Select A Source - Philips AT10 User Manual

4 Play
Play from Bluetooth-enabled
devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
•
Make sure that your Bluetooth device is compatible
with this product.
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
•
The product can memorize a maximum of 4 paired
devices. The fifth connected device will replace the
first one.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
•
The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
1
Press SOURCE repeatedly to select
Bluetooth source.
» [bt] flashes on the display.
2
Press and hold PAIRING for 3 seconds to
enter Bluetooth pairing mode.
3
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
4
When [Philips AT10] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password "0000".
» After successful pairing and connection,
the product beeps twice, and [bt]
stops flashing.
To disconnect the Bluetooth-enabled device:
Press and hold PAIRING for 3 seconds;
•
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» The product beeps twice, and [bt]
begins to flash.
To reconnect the Bluetooth-enabled device:
• When this product enters Bluetooth
mode, it will reconnect the last connected
device automatically; or
• On your Bluetooth device, select "Philips
AT10" on your Bluetooth menu to start
connection.
To connect another Bluetooth-enabled device:
1
Press and hold PAIRING for 3 seconds to
disconnect the currently connected device.
» The product enters Bluetooth pairing
mode.
2
Connect another Bluetooth device.
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the product.
Play from an SD card or USB
device
Note
•
Make sure that the USB storage device or SD card
contains playable audio content.
Play from an SD card
1
Press SOURCE repeatedly to select the
SD card source.
» [SD] is displayed.
EN 7