To Set Timer - Panasonic NN-CD997S User Manual

to Set timer

This feature allows you to program Standing Time after cooking is completed and to program the oven as a
minute timer and/or to program delay start.
to Use as a Kitchen timer:
1 Press.
2 Set desired amount of
time using the Time / Weight
Dial.
(up to  hour and 30 minutes)
3 Press.
Time counts down without
operating oven.
to Set Standing time:
1
Set the desired cooking
program. (See page 8-4
for directions.)
4 times
2 Press.
3 Set desired amount of
Standing Time using the
Time / Weight Dial.
(up to  hour and 30 minutes)
4 Press.
Cooking starts.
After cooking, standing time
will count down without
operating oven.
to Set delay Start:
1
2
3
4 times
4
nOtES:
. If the oven door is opened while Standing Time
or Kitchen Timer has been set, the time in the
display window will continue to count down.
2. Delay Start cannot be programmed before any
Auto Control Function. This is to prevent the
standing temperature of the food from rising
before defrosting or cooking begins. A change in
the starting temperature could cause inaccurate
results.
- En-4 -
Press.
Set desired amount of delay
time using the Time / Weight
Dial.
(up to  hour and 30 minutes)
Set the desired cooking
program.
(See page 8-4 for directions.)
Press.
Delayed time counts down.
Then cooking will start.