To Set Timer - Panasonic NN-CD997S Operating Instructions Manual

To Set Timer

This feature allows you to program Standing Time after cooking is completed and to program the oven as a
minute timer and/or to program delay start.
To Use as a Kitchen Timer:
1 p Press.
p Set desired amount of time
2
using the Time / Weight Dial.
(up to 1 hour 30 minutes)
3 p Press.
Time counts down without
operating oven.
To Set Standing Time:
p Set the desired cooking
1
program. (See page 8-11 for
e.g.
directions.)
4 times
p Press.
2
p Set desired amount of
3
Standing Time using
the Time / Weight Dial.
(up to 1 hour 30 minutes)
p Press.
4
Cooking will start.
After cooking, standing time
will count down without
operating oven.
To Set Delay Start:
1
2
3
4 times
4
NOTE:
1. If oven door is opened during the Standing Time
or Kitchen Timer, the time in the display window
will continue to count down.
2. Delay Start cannot be programmed before any
Auto Control Function.
This is to prevent the standing temperature of
the food from rising before defrosting or cooking
begins. A change in the starting temperature
could cause inaccurate results.
- En-13 -
p Press.
p Set desired amount of delay
time using the Time / Weight
Dial. (up to 1 hour 30 minutes)
p Set the desired cooking
program. (See page 8-11 for
directions.)
p Press.
Delayed time will count down.
Then cooking will start.