How To Load And Play The Disk Demo Songs - Yamaha SY99 Owner's Manual

How to load and play the disk demo songs

The disk included with the SY99 contains demo songs which take advantage of its capabilities. Here's how
to load and play the songs:
CAUTION
If the internal memory contains data you wish to keep, be sure to save it before loading the demo.
Load the demo song data
from disk
6
1. Insert one of the demo disk into the disk drive, with the shutter going in first
and the label facing up. Push it gently in until it clicks into position.
2. Press UTILITY, and then press F4 (Disk) to get the following display. (If you
have been editing voice or multi data, the top line of the LCD will blink
"AUTO-STORE". For details on Auto-Store, refer to page 74.)
3. Press once to move the cursor to 02:Load From Disk, and press ENTER to
get the following display.
4. With the cursor located at 01:All Data, press ENTER to get a display like the
following. (The filename may be different.)
5. Press F8 (Go). The display will ask "Are you sure". Press YES if you are
sure you want to load the data from disk. Loading data from disk will erase
any data which was previously held in the SY99's sequencer and internal
voice and MDR/Sample memories.
6. While the data is being read from disk, the bottom line of the LCD will show
"Now executing".