Yamaha SY99 Owner's Manual page 56

Use Graph mode to view
notes
Playback the corrected
song
Press ENTER to insert the program change data. In the same way, insert another
program change number 1 at the beginning of the track (measure 001-01-00/96)
so that the original voice P1-A03 AP| Concert will be selected when the track
begins.
Press F2 (Chng) to return to data change mode. Move the dial to scroll
through the data and notice that the program change data has been inserted into
the track.
When you return to song play mode and playback this track, the piano voice
originally selected for this track will change to voice P1-A06 EP:Classic when
playback reaches measure 17.
Song edit Graph mode allows you to view notes as dots on a keyboard diagram.
Press F7 (Grph) to enter Graph mode. The following display will appear.
A horizontal line will be displayed with dots indicating the position of note data
in the measure. To select the measure, place the cursor on the measure number
and use the dial or -l +l keys. To move through the data note by note, place the
cursor on the same row as the downward pointing arrow and use the dial or
-1 +1 keys. As you move, the keyboard diagram in the lower part of the LCD will
indicate the notes at the currently selected 32nd note area. The notes will also
be played as you come to them.
Since the 76-note keyboard is too large to be completely displayed in the
LCD, you may need to press F5 (Lkey) or F6 (Hkey) to view notes which have
been played in the very highest or lowest ranges.
Graph mode displays only note data, and does not allow you to modify the
data. However since it displays a diagram of the keyboard, you may find it con-
venient to use graph mode to find the note you wish to edit, and then press F8
(Data) to move to Data mode to change or insert data.
Press EXIT to leave song edit mode and return to song play mode. Press l< and
then RUN to playback the song. Check that the F3 note has been corrected to
F#3, and that the voice changes to program number 3 at measure 17.
45