D-Link AirPro DWL-6000AP Manual page 10

Using the Configuration Menu
Advanced > Encryption
Select 802.11a or 802.11b
Wireless Band:
Select from one of the following:
Authentication:
Open System: the DWL-6000AP will be visible to all devices on the
network. Open System is the default setting.
Shared Key: in order to access the DWL-6000AP on the network,
the device must be listed in the Access Control List
Select Enabled or Disabled (the default setting is Disabled)
WEP:
Select HEX (Hexadecimal) or ASCII
WEP Key Type:
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Select 64, 128 or 256 bit for 802.11b; 64, 128, 152 bit for 802.11a
WEP Key Size:
Select the key that you will use from one of the four keys in the Key Table.
Valid Key:
Input up to 4 keys using the format that you have selected in Wep Key
Key Table:
Type.
18
Using the Configuration Menu
Tools > Admin
If you wish, you
can change your
password here.
Keep a copy of
your password in
a safe place.
Click Help at any
time if you need
assistance.
Click Apply if you
have made any
changes.
Tools > System
If you have made changes to the configuration settings, click Restart in this window
to apply the changes.
Click Restore, if you would like to return the DWL-6000AP to its factory default
settings.
19