D-Link AirPro DWL-6000AP Manual page 8

Using the Configuration Menu
Whenever you want to configure your network or the DWL-6000AP, you can access
the Configuration Menu by opening the web-browser and typing in the IP Address of
the DWL-6000AP. The DWL-6000AP default IP Address is shown below:
Open the web browser
Type in the IP Address of
the Access Point
Note: if you have changed the default IP Address assigned to the DWL-6000AP,
make sure to enter the correct IP Address.
Type admin in the User
Name field
Leave the Password
blank
Click Next
Home > Wizard
The Home>Wizard screen will
appear. Please refer to the
Quick Installation Guide for
more information regarding
the Setup Wizard.
Home > Wireless
Here the Home> Wireless tab is
displayed. If you wish to change
the default settings, you can
make changes to these items:
Wireless Band (802.11a or
802.11b)
SSID
Channel
14
Using the Configuration Menu
Home > Wireless (continued)
Wireless Band:
802.11a is selected .
SSID:
802.11a and 802.11b. The SSID is a unique name that identifies a network.
All devices on a network must share the same SSID name in order to
communicate on the network. If you choose to change the SSID from the
default setting, input your new SSID name in this field. The SSID can be up
to 32 characters in length.
Channel:
the default channel for 802.11b. Select a different channel if you want to
change the default setting. All devices on the network must be set to the
same channel to communicate on the network. (Current wireless network
adapters will automatically scan for the channel to establish connection with
the access point.)
admin
Click Help at any time for more information.
Click Apply if you have made any changes or additions.
Home > LAN
This window displays the default settings of the DWL-6000AP.
IP Address is 192.168.0.50. If you select Dynamic IP Address, you will
obtain a dynamic IP Address from a DHCP server on your network.
(Note: you will need to use the AP Manager to determine the IP Address
The Subnet Mask is 255.255.255.0. Input the IP Address of the Default
Gateway (the router on your network.)
Click Apply if you have made any changes.
Choose 802.11a or 802.11b. In the illustration shown,
(Service Set Identifier) "default" is the default setting for both
Channel 36 is the default channel for 802.11a. Channel 6 is
dynamically assigned to the Access Point.)
255.255.255.0
The default
15