Turning Power On/Off; Turning On The Main Power - Sharp PN-U553 Setup Manual

Caution
• Turn on the monitor first before turning on the PC or
playback device.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.

Turning Power On/Off

Turning power on/off
Press the POWER button or POWER switch to turn the power
ON/OFF.
• The Power switch is located on the back of the monitor.
Power switch
Green lit
Orange lit
Green flashing
nDate/time setting
• If the time has not been set, such as when the monitor
•
•
•
Use the position of the slot on the front as a guideline for
operation of the switches. (The switch with the protrusion is
the Power switch.)
Status
is first turned on, set the date and time in DATE/TIME
SETTING of the SETUP menu.
Be sure to set the date and time.
TIPS
Set the date in "Year/Month/Day" order.
Set the time on a 24-hour basis.
The clock stops if the main power remains off for about
1 week.*
(* Approximate time. The actual time varies depending
on the state of the monitor.)
Power switch
Power LED
Guideline
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
7
E