Table of Contents
Advertisement
Quick Links
This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and
understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows 8.1" refers to Windows
8.1 Pro Update, 64-bit, and "Windows 7" refers to Windows
Service Pack 1 (SP1) (downgraded from Windows 8.1 Pro Update license). System configuration and software installation should be conducted by a
user who has administrator privileges. If a [User Account Control] screen comes up, please be sure to confirm the contents before continuing.
The information contained within this manual applies to the following models:
• MB Model: MC33M/B-K, MC36L/B-K, MG33M/B-K, MG36L/B-K
Note:For details about a model number, please see "Model number list" (p.27).
1
Checking Included Accessories .............................................2
2
Connecting Included Accessories ..........................................2
3
Windows Setup ......................................................................3
4
Knowing the Parts ..................................................................6
1
5
Mouse.....................................................................................8
6
LAN Function..........................................................................9
7
Opening and Closing Covers ...............................................11
Note:The illustrations, screenshots, icons, and on-screen text shown in this document may differ from the ones you actually encounter.
User's Guide
MB Model
®
7 Professional 64-bit with Service Pack 1 (SP1) or Windows
8
Memory ............................................................................... 14
9
PCI board/PCI Express x16/x1 board ................................. 15
10
System Configuration .......................................................... 17
11
Security Chip Function ........................................................ 18
12
Applications ......................................................................... 19
13
Recovery ............................................................................. 20
Appendix ............................................................................. 25
®
®
7 Professional 64-bit with
Advertisement
Table of Contents
Related Manuals for NEC MC33M/B-K
Summary of Contents for NEC MC33M/B-K
-
Page 1: Table Of Contents
If a [User Account Control] screen comes up, please be sure to confirm the contents before continuing. The information contained within this manual applies to the following models: • MB Model: MC33M/B-K, MC36L/B-K, MG33M/B-K, MG36L/B-K Note:For details about a model number, please see “Model number list” (p.27). -
Page 2: Checking Included Accessories
User's Guide Recovery Disc 1,2 Connect the purple keyboard port to the purple keyboard port ( *1 : Included with models MC33M/B-K and MC36L/B-K Connect the mouse to a USB port ( *2 : Included with models MG33M/B-K and MG36L/B-K... -
Page 3: Windows Setup
3. Connect the display Windows Setup Connect your display to the computer using either a digital connector or an analog connector. When you first power up your new computer, it is necessary to perform Windows setup. If you will use the dual display function, connect the second display after Windows Setup has finished. - Page 4 The screen should change several times during this process, and it may take some Turning on the power time before the desktop screen is displayed. Setting up Windows7 OS Turn on the display. Press the power switch ( • It will take some time for the [Windows 7 Professional] screen to appear. Please wait Never turn off the power during Windows setup.
- Page 5 Creating multiple hard disk partitions After Windows setup has completed, Windows Experience Index measurements are As a default setting, the first internal hard disk has only one useable partition performed once your computer continues to be in an idle state for around 15 minutes. (volume), designated as the C:drive.
-
Page 6: Knowing The Parts
® ® Windows Update and Microsoft Update Knowing the Parts ® The latest updates and important updates are available through Windows Update ® ® ® or Microsoft Update. Please run Windows Update or Microsoft Update regularly Names and descriptions of your computer's major components to ensure you always have the latest version of Windows installed. - Page 7 Explanation of Components Number Name Explanation Number Name Explanation Air vent These holes are designed to allow internal heat to escape. Optical drive This computer features either a built-in DVD Super Please be careful not to leave the air vent blocked. Multi drive or a built-in DVD-ROM drive.
-
Page 8: Mouse
Number Name Explanation Mouse (24) Line out terminal (mini A terminal used to output audio signals to audio devices. jack) ( A USB mouse is included. (25) PCI Express x16 slot A slot used to attach a PCI Express x16 board. Helps to enhance and extend the machine's functions. -
Page 9: Lan Function
LAN Function • In order to enable WoL, it is necessary to install special software on the administrator's PC to allow sending of Magic Packets. • It is not possible to use WoL in cases where the previous system shutdown (power This section covers important points and the correct procedure for setting up the LAN off, sleep, or hibernate) was not correctly completed. - Page 10 Press the <F10> key. How to configure your computer to allow WoL from sleep or hibernate mode A confirmation screen should be displayed. Specify the following settings in [Device Manager] -> [Network adapters]. Confirm that [Yes] is selected and then press <Enter>. Double click [Network adapters], and double click the displayed LAN These setting values are saved, the BIOS setup utility will finish, and your adapter.
-
Page 11: Opening And Closing Covers
Remove setscrews by rotating them by hands, and release the lock. Opening and Closing Covers Removing the side cover The side cover needs to be removed when installing internal devices such as memory and a PCI board. • The plate will be very hot right after the machine is used, and you may e burnt if you touch it. - Page 12 If the computer is positioned horizontally, proceed to step 4. Closing the side cover Attach the Stands to the computer if it is positioned vertically. Refer to the following procedure when closing the side cover. Attach the security lock, if necessary. Connect the power cord and all other cables and cords.
- Page 13 Closing the drive bay Chassis prong Be careful not to pinch, strike, or cut your fingers when closing the drive bay. Release the lock, carefully move down the drive bay, and push it from the top and lock it. Exercise care not to pinch the internal cables by the drive bay. Cable Hold the bottom side of the optical drive unit with your hand, and carefully pull up the drive bay with your other hand.
-
Page 14: Memory
Engage the prongs at the bottom of the front mask. Memory Do not pinch the cables connected between the front mask and the computer. Before installing the board Before installing memory in this computer, check the memory compatibility, the Chassis prong installation order and the location of the slot. -
Page 15: Pci Board/Pci Express X16/X1 Board
Inserting the memory into the slot PCI board/PCI Express x16/x1 board Mount memory cards into sockets DIMM4, DIMM2, DIMM3, and DIMM1 in this order. Before installing the board To use dual-channel memory access with two pairs of memory cards, install two pairs The following are the available board sizes for this computer. - Page 16 Installing Removing Open the side cover and drive bay as described in "Removing the side Open the side cover and drive bay as described in "Removing the side cover" (p.11) "Opening the drive bay" (p.12). cover" (p.11) and "Opening the drive bay" (p.12). Remove one screw from the PCI board slot cover that you are installing, Remove one screw from the PCI board that you wish to remove.
-
Page 17: System Configuration
Restoring default factory setting values System Configuration Please follow these steps to restore your system to the default factory settings. Enter the BIOS setup utility. The BIOS setup utility Select [Exit] on the Menu bar, using <> or <> keyboard key. The menu appears. -
Page 18: Security Chip Function
Enable the security chip Security Chip Function After initializing the security chip, carry out the following procedure to enable it for use again. Outline Turn the power on and immediately press <F2> key several times. The BIOS setup utility will then be displayed. From the [Security] menu, select [TCG Feature Setup] and press <Enter>. -
Page 19: Applications
Deleting Data from the Hard Disk Applications The Recovery Disc is not included with models MC33M/B-K and MC36L/B-K. ® Microsoft Office Single Image v15 About Deleting Data from the Hard Disk ® "Microsoft Office Single Image v15" is not pre-installed MG33M/B-K and MG36L/B-K Data can be deleted from the computer's hard disk. -
Page 20: Recovery
Turn on the power and immediately press <F12> key several times. The [Sartup Device Menu] is displayed. The Recovery Disc is not included with models MC33M/B-K and MC36L/B-K. From the [Startup Device Menu], select the optical drive using <> or <>... - Page 21 During recovery, be sure to follow the steps in this manual and on the recovery screen. Missing a step, pressing a key other than the indicated key, or changing the If you are using model MC33M/B-K or MC36L/B-K, you can only carry out the setup procedure may result in improper recovery.
- Page 22 Display the charm bar, and click [Settings]. Using the Windows function Click [Change PC settings]. Recover the computer using the Windows function. Click [Update and recovery]. The subsequent procedure differs depending on whether or not the computer can Click [Recover]. start up.
- Page 23 If the computer does not start up Computer recovery (Windows 7) If the system does not start up, you can recover the system by starting it from the Computer recovery is performed. "recovery drive". For creation of "recovery drive", please refer to "Creating a recovery There are two recovery options: "Recovery from hard disk"...
- Page 24 DVD Recovery Windows Setup Turn the power on and immediately press <F2> key several times. Perform Windows setup. The BIOS setup utility will then be started. Windows Setup When the BIOS setup utility is displayed, insert the "Recovery Disc 1" into Set up the Windows system by referring to "...
-
Page 25: Appendix
Switching the Windows system to another version Appendix Outline Disabling the "Fast Startup" function (Windows 8.1) ® The "Fast Startup" function allows quick computer startup from the power-off state. The If you are using the MG33M/B-K, MG36L/B-K Windows 7 Professional 64-bit with "Fast Startup"... -
Page 26: Specifications
Creating a recovery drive (Windows 8.1) Specifications We recommend that a "recovery drive" be created for times when problems such as Model name MC33M/B-K MC36L/B-K corrupted files result in Windows not loading correctly. MG33M/B-K MG36L/B-K ® ® Intel Core i5-4590... - Page 27 Model name Model number Model number list MG36L/B-K PC-MG36LBZEBDGK, PC-MG36LBZEBDNK, PC-MG36LBZEB6GK, PC-MG36LBZEB6NK, Model name Model number PC-MG36LBZEEDGK, PC-MG36LBZEEDNK, MC33M/B-K PC-MC33MBZCBECK, PC-MC33MBZCB4CK, PC-MG36LBZEE6GK, PC-MG36LBZEE6NK, PC-MC33MBZCEECK, PC-MC33MBZCE4CK, PC-MG36LBZFBFGK, PC-MG36LBZFBFNK, PC-MC33MBZDBECK, PC-MC33MBZDB4CK, PC-MG36LBZFB8GK, PC-MG36LBZFB8NK, PC-MC33MBZDEECK, PC-MC33MBZDE4CK, PC-MG36LBZFEFGK, PC-MG36LBZFEFNK, PC-MC33MBZJUECK, PC-MC33MBZJU4CK, PC-MG36LBZFE8GK, PC-MG36LBZFE8NK, PC-MC33MBZJ1ECK, PC-MC33MBZJ14CK,...
- Page 28 MEMO...
- Page 29 MEMO...
- Page 30 MEMO...
- Page 31 MEMO...
- Page 32 In the event that the product is used for the above facilities and/or equipment or in control systems, etc. where personal injury and/or property damage is caused, NEC assumes no responsibility.