Clock Display At Power Off - Panasonic C1305L Operating Instructions Manual

Preparation
1
Set your car's ignition switch to the ACC or
ON position.
C
C
A
N
O
2
Press [SOURCE] (PWR: Power).
CQ-C1335U
Pull the insulation fi lm out from the backside of the remote
control gently.
The 12-hour system is used for the clock.
1
Press [DISP].
2
Hold down [DISP] for more than 2 seconds.
3
Adjust the hour.
[]: sets the hour ahead.
[]: sets the hour back.
4
Press [DISP].
5
Adjust the minute.
[]: sets the minute ahead.
[]: sets the minute back.
CQ-C1335L
(clock display)
Hour blinks
Hour entered
Minute blinks
Minute entered
Note: Battery Information:
Battery Type: Panasonic lithium battery (CR2025) (Included in
the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)
6
Press [DISP].
Notes:
• "ADJUST" is displayed before adjusting the clock.
• Hold down [] or [] to change numbers rapidly.

Clock Display at Power Off

Press [DISP] to change the display.
Display off
Completed
Clock display