Panasonic BB-HNP11A Operating Instructions Manual page 7

Alarm/Sensor Recording is added
[Alarm1/Sensor] and [Alarm2] are added on the Camera Registration Information
window.
Alarm/Sensor Recording is available with using the alarm/sensor function on the
cameras.
(Only alarm/sensor-supported cameras can perform Alarm/Sensor Recording.)
Setting
Set the [Alarm1/
Sensor/Alarm2]
recording condition
Alarm enable condition Specify Alarm enable condition ([Rising : GND to Open
Before Alarm1/Sensor/
Alarm2 is detected :
After Alarm1/Sensor/
Alarm2 is detected :
Check the box to record images while detecting the
alarm signal of camera.
Note
Select [Sensor] for sensor-supported cameras.
(High).] or [Falling : Open (High) to GND.])
Note
• Specify the alarm enable condition after
checking the alarm's specification.
• [Rising : GND to Open (High).] is selected
automatically when select [Sensor].
Specify the time before Alarm1/Sensor/Alarm2 is
detected or after Alarm1/Sensor/Alarm2 is detected.
Operating Instructions (Additional Features)
Description
7