GE AF-650 GP Quick Installation Manual page 40

EN-13 Link Speed
Option:
[0] * None
[1] 10 Mbps
[2] 100 Mbps
EN-14 Link Duplex
Option:
[0] Half duplex
[1] * Full duplex
EN-21 Process Data Config Write
Range:
[[0 - 9] PCD read 0 - 9]
NB!
For configuration of 2-word (32-bit) parameter read/write, use 2 consecutive arrays in par. EN-21 and EN-22.
EN-22 Process Data Config Read
Range:
[[0 - 9] PCD read 0 - 9]
EN-28 Store Data Values
Option:
[0] * Off
[1] Store All set-ups
EN-29 Store Always
Option:
[0] * Off
[1] On
Function:
Forces the link speed for each port in 10 or 100 Mbps. If par. EN-12 is set to: ON, this parameter is read
only and displays the actual link speed. "None" is displayed if no link is present.
Function:
Forces the duplex for each port to Full or Half duplex. If par. EN-12 is set to: ON, this parameter is read
only.
Function:
Configuration of readable process data.
Function:
Configuration of readable process data.
Function:
This parameter activates a function that stores all parameter values in the non-volatile memory (EEPROM)
thus retaining parameter values at power-down.
The parameter returns to "Off".
The store function is inactive.
All parameter value will be stored in the non-volatile memory, in all four setups.
Function:
Activates function that will always store received parameter data in non-volatile memory (EEPROM).
Modbus TCP
6
39