Specifications - Panasonic MDF-237 Operating Instructions Manual

SPECIFICATIONS

Product name
External dimensions
Internal dimensions
Effective capacity
Exterior
Interior
Door
Insulation
Storage baskets
Access port
Compressor
Condenser
Evaporator
Refrigerant
Temperature controller
Temperature display
Temperature sensor
Temperature alarm
Accessories
Weight
Battery
Optional component
Note:
Design or specifications will be subject to change without notice.
Refer to the updated catalog when ordering an optional component.
The battery for power failure alarm is an article for consumption. It is recommended that the battery will
be replaced about every three years.
replacement of the battery for recycling.
W905 mm x D687 mm x H881 mm
W790 mm x D440 mm x H715 mm
Colored aluminum plate
Rigid polyurethane foamed-in place
Polyethylene coated steel wire
Diameter 17 mm, Right side and bottom left
Aluminum tube on sheet type
Electronics controller (between -18 and -35
Digital display (between -50 and +50
Flash of digital indicator and alarm lamp, Buzzer, (Remote alarm)
1 set of key, 1 scraper, 3 storage baskets
For power failure alarm, Nickel-metal-hydride battery, DC 6 V, 1100 mAh
Temperature recorder (MTR-G85C, MTR-4015LH)
Recorder fixing (MDF-S740, MDF-S3040)
2 storage baskets (MDF-13B2), 3 storage baskets (MDF-13B3)
Interface board (MTR-480, MTR-L03),
Data acquisition system (MTR-5000)
Contact our sales representative or agent at the time of
31
Biomedical Freezer
MDF-237
221 L
Painted steel
Painted steel
Hermetic type, 200 W
Wire and tube type
R-134a
Thermister sensor
60 kg
Automatic charge
o
C)
o
C)