Motorola AirDefense Model 510 Installation Manual page 22

16 Model 510 Sensor: Installation Guide
1. Use the mounting template to cut a hole for the CAT 5 cable.
2. Install the T-bar clamp that fits the T-bar.
T-bar
T-bar clamp halves
23.0mm (15/16") or 14.2mm (9/16") T-Bar
(The clamps are different widths but the assembly is the same.)
3. Remove the mounting bracket from the 510.
4. Attach the mounting bracket to the T-bar clamp.
Universal mounting bracket
T-bar
T-bar clamps
(attached
to T-bar)
Port connector
opening
(View from above ceiling tiles, looking down)
Slide together
Port connector
opening
T-bar
T-bar clamp halves
15.9mm (5/8") T-Bar
Universal mounting bracket
Slide together
T-bar