6
Sensor UI
All Sensor network settings can be modified from either the Sensor UI or from the Sensor program
area in the AirDefense GUI. Several settings are required for initial Sensor setup, in order for the
Sensor to communicate with the AirDefense Server. For a list of the required settings,
Addresses" on page
-25. You can use the Sensor UI to configure several more optional settings, or
you can configure these later from the Server GUI.
The Sensor UI consists of a display area and four tabs:
• Configure Sensor
• View Status
• Update Software
• Advanced Settings.
The display area and Configure Sensor tab are described in this section. You do not need to use the
View Status, Update Software, or Advanced Settings tabs during initial setup. Information about
them is located in the AirDefense User Guide.
6.1 Display Area
The display area appears at the top of the
window and lists information that the sensor
has automatically detected:
•
AC address
M
•
Software Version
•
Hardware Model
•
Sensor Up-time
•
Information about the connection.
Sensor UI
27
see "Set