Panasonic CZ-64ESMC3 Operating Instructions Manual page 15

3
Perform operation.
Press .
A
A: Energy saving button
(When using a gas heat pump air
conditioner: Performs the Effi cient
operation.)
Switches Energy saving/Normal operation.
(Only for indoor units equipped with the
energy-saving function)
B: Enter button
Returning to the screen for step 2 can
change the settings during operation.
C: Operation indicator (Green)
Note
• Pressing after recovery from blackout will resume operation with the contents before
blackout has occurred.
• If no operation is performed for a certain period of time, the back light turns off to save
electricity. (Press any button for illumination.)
About energy saving
• The energy-saving operation restricts the maximum current value, maximum engine rotation
speed, etc., resulting in decreased cooling/heating performance.
(If the outdoor unit operates with the restricted value or less, there is no restriction.)
• If all of the indoor units are not equipped with the energy-
saving function, pressing the Energy saving [
will display the screen shown on the right.
B C
4
Finish operation.
Press .
Start operation.
• The pop-up screen appears. (4 sec.)
• The operation indicator illuminates.
Stop operation.
• The pop-up screen appears. (4 sec.)
* To clear the pop-up screen, press
] button
.
15
(EN)