Panasonic CZ-64ESMC3 Operating Instructions Manual page 41

8
Select the fi eld to register.
▲ ▼ →
• Up to 4 patterns can be registered.
9
Set the start time and end time.
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to fi nish.)
 To change
• Select the fi eld to change in step 8.
• Select [Change].
▲ ▼ →
• Following the above step 9, select the
start time, end time.
 To delete
• Select the fi eld to delete in step 8.
• Select [Delete].
▲ ▼ →
• Select [YES].
◄ ► →
Note
This unit is equipped with the following 3 settings. Any of them is set at the time of
installation.
• Schedule peak cut (P.36) • External input peak cut (P.38) • Schedule energy saving (P.40)
For detailed settings, see each page.
The Effi cient operation setting is the same as that for [Schedule energy saving].
→
(Press 2 times to fi nish.)
41
(EN)