Menu Screens
MENU SCREEN 7
The RS-232C parameters and display language are set on Menu Screen 7.
d
Setting the bit length (7BIT/8BIT)
f
Setting the stop bit (STOP-1/STOP-2)
g
Setting the parity (ODD/EVEN/NON)
h
Setting the baud rate (4800BPS/9600BPS)
j
Selection of the menu display language
(ENGLISH/FRANÇAIS).
• Underline denotes the factory setting.
CAUTIONS:
•
The menu screens are not displayed while the unit is playing back a tape.
•
While the unit is recording, the contents of Menu Screen 1 can be changed; however, Menu Screens 2 to 7 are for
reference only and therefore cannot be changed.
12