Related Manuals for Siemens WM14W640IL
Summary of Contents for Siemens WM14W640IL
- Page 1 Washing machine WM14W640IL siemens-home.com/welcome Register your product online ens-home.com/welcome...
-
Page 2: Your New Washing Machine
Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries. -
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Appliance settings ..32 Positioning and connecting . . 43 Activating the setting mode ..32 Included with the appliance ..43 Changing the signal volume .
-
Page 5: Intended Use
Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in detergent solution. To be operated with cold mains ■... -
Page 6: Safety Instructions
Safety instructions If you lean on the washing Safety instructions ■ machine door when it is open, the washing machine Electrical safety may tip over and cause S a f e t y i n s t r u c t i o n s injuries. -
Page 7: Safety For Children
Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves. -
Page 8: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 12 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's... -
Page 9: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 10: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 26 Operating/display panel Door with door handle 9S Open the door... -
Page 11: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive P Child lock (w 3 sec) Note: (except for the main switch) and only to prevent the set functions from need to be pressed lightly. being changed accidentally: Press and hold the Finish in 5 + and - button at the ( Main switch... -
Page 12: Display Panel
Getting to know the appliance Display panel @ Finish in 5 time e.g. 2:30; Programme duration depends on the programme selection in h:min (hours:minutes), Preselection of end time ■ 1 - 24 h; Programme ends after ... h (h = hours), Base dosing quantity ■... - Page 13 Getting to know the appliance Further information Further information Switching off the appliance automatically: Programme progress: On OFF ~ Page 8, ~ Page 32 Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g.
-
Page 14: Laundry
Laundry Soiling ■ Laundry Wash laundry with the same level of soiling together. P repare the laundry Some examples of soiling levels can L a u n d r y be found on ~ Page 15 Caution! – Light: Do not prewash, select the Damage to the appliance/fabrics speedPerfect G setting if necessary... -
Page 15: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 16: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable. - Page 17 Overview of programmes Programme/type of laundry/information Settings Mixed Fabrics Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $, 0 - 1600** rpm ecoPerfect ¦, speedPerfect G, Prewash !, Extra rinse l, Less Ironing æ Detergent è, fabric softener è...
- Page 18 Overview of programmes Programme/type of laundry/information Settings Rinse / Spin Extra rinse/spin with selectable speed Note: . The Extra rinse l button is set by default for this $, 0 - 1600** rpm programme. If you require a spin cycle only, press the button to Less Ironing æ...
- Page 19 Overview of programmes Programme/type of laundry/information Settings *** Hygiene Max. 7 kg/5* kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: . Particularly suited to washing items that need to be $, 0 - 1600** rpm hygienically clean and especially kind to sensitive skin thanks to ecoPerfect ¦, speedPerfect G, the longer wash cycle at a defined temperature, higher water...
- Page 20 Overview of programmes Programme/type of laundry/information Settings *** Sportswear Max. 2 kg Sportswear and leisurewear made from microfibre fabrics Ž - 40 °C Notes $, 0 - 800 rpm Laundry must not be treated with fabric softener. ■ ecoPerfect ¦, speedPerfect G, Before washing, clean the detergent drawer thoroughly (all ■...
-
Page 21: Starching
Overview of programmes Programme/type of laundry/information Settings *** Automatic / Auto 60° Max. 6 kg More intensive treatment of the laundry; 60 °C The degree of soiling and the type of fabric are automatically $, 1400 rpm detected and the washing sequence and intelligent dosage are adjusted accordingly. -
Page 22: Programme Default Settings
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Finish in 5 The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after Before starting the programme, you selecting the programme. -
Page 23: I-Dos Settings
Programme default settings After starting the programme i-Dos ô for detergent (if a Finish in 5 time has been selected Dosage strengths and the wash programme has not yet started), you can change the High: heavy soiling and staining ª preselected number of hours as follows: Medium: average soiling ©... -
Page 24: Additional Programme
Additional programme settings Extra rinse l Additional programme Additional rinse cycle for particularly settings sensitive skin and/or for areas with very soft water. An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on Less Ironing æ... -
Page 25: Switching On The Appliance/ Selecting A Programme
Operating the appliance Switching on the appliance/ Placing laundry into the drum selecting a programme Warning Press the # button. The appliance is Danger of death! switched on. Items of laundry pretreated with cleaning agents that contain solvents, The Cottons programme set at the e.g. -
Page 26: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent Select additional programme and care products settings The washing machine doses your By selecting additional settings, you can detergent and fabric softener better adapt the washing process to automatically in most programmes. your items of laundry. The intelligent dosage has been preset The settings can be selected or at the factory for all programmes in... -
Page 27: Child Lock
Operating the appliance Child lock Notes Do not leave the door open for too ■ (w 3 sec) long when adding laundry as water from the laundry may leak out. You can lock the washing machine to For safety reasons, the door remains prevent the functions you have set from ■... -
Page 28: Programme End
Intelligent dosing system Programme end Intelligent dosing - 0 - and Ï appear in the display panel. system The Ü button indicator lamp is off. Intelligent dosing system in Removing laundry/switching I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer off the appliance i-Dos Intelligent Dosing system... -
Page 29: Everyday Use
Intelligent dosing system If intelligent dosagei-Dos ô or Notes ■ i-Dos i has been selected, the Only use easy-pour liquid products ■ corresponding indicator lights up. that the manufacturer recommends If intelligent dosage has not been adding to the detergent drawer. ■... -
Page 30: Basic Settings
Intelligent dosing system The selection (on/off) and the Note: My water hardness: selected dosage strength for i-Dos i and i-Dos ô are saved for each programme until they are changed again, even if the washing machine is switched off. Topping up the detergent/ fabric softener: Below is an example of detergent If the indicator light for the selected... -
Page 31: Manual Dosage
Intelligent dosing system Changing the basic dosages: Caution! Damage to the appliance Press the corresponding i-Dos Cleaning agents and agents for button (ô or i) for approx. 3 pretreating laundry (e.g. stain removers, seconds. The preset basic dosage prewash sprays, etc.) may cause will appear in the display panel. -
Page 32: Appliance Settings
Appliance settings Changing the signal volume Appliance settings Use the Finish in 5 + or - button to You can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and the ■... -
Page 33: Sensors
Sensors Sensors Cleaning and maintenance A utomatic load sensing S e n s o r s Warning Depending on the type of fabric and C l e a n i n g a n d m a i n t e n a n c e Danger of death! load, the automatic load sensing There is a risk of electric shock if you... -
Page 34: Machine Housing/Control Panel
Cleaning and maintenance Machine housing/control i-Dos detergent draw and its panel housing Wipe the housing and the control Emptying the dispensers: ■ panel with a soft, damp cloth. The dispensers have emptying Remove the detergent residue outlets with removable sealing plugs ■... - Page 35 Cleaning and maintenance Cleaning the dispensers/detergent drawer: The detergent drawer can be removed completely to allow you to clean to dispensers after you have emptied them. a) Empty the dispensers before removing the drawer. – Protect the rear drawer connector Only put the drawer handle Note: against water, detergent or fabric-...
-
Page 36: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance The drain pump is blocked, emergency draining Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be Put the service flap back on, lock it into place and close it. -
Page 37: Filter In The Water Supply Blocked
Faults and what to do about them. Filter in the water supply Faults and what to do blocked about them. First, reduce the water pressure in the Emergency release supply hose: F a u l t s a n d w h a t t o d o a b o u t t h e m . Turn off the tap. -
Page 38: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 39: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking out. Attach the drain hose correctly or replace it. ■ Tighten the screw connection of the drain hose. ■ The machine is not filling Have you pressed the Ü... - Page 40 Faults and what to do about them. Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an ■ longer than usual. imbalance by repeatedly distributing the laundry. Not a fault – the foam detection is system active – a rinse cycle has been ■...
-
Page 41: After-Sales Service
After-sales service Faults Cause/Remedy - P - and Ï appear in the The door is unlocked. It is possible to add laundry. display panel when the cycle is paused. If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required: Switch off the appliance and pull out the mains plug. -
Page 42: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption** consumption**... -
Page 43: Technical Data
Technical data Technical data Dimensions: T e c h n i c a l d a t a 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A Nominal power 1900 –... -
Page 44: Safety Instructions
Positioning and connecting In addition, a hose clamp Notes (24 - 40 mm diameter, available from In addition to the safety information ■ specialist dealers) is required to listed here, the local water and connect the water drain hose to a electricity supplier may have special siphon. -
Page 45: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transport brace screws. -
Page 46: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Water inlet Left-hand connection Warning ■ Danger of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). -
Page 47: Water Outlet
Positioning and connecting Water outlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Risk of scalding! Maximum 1000 kPa (10 bar) When you are washing at high When the tap is open, the water flow temperatures, there is a risk of scalding rate is at least 8 l/min. -
Page 48: Levelling
Positioning and connecting Levelling Connection Drainage into a washbasin Align the appliance using a spirit level. ■ Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. -
Page 49: Electrical Connection
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. The mains cable is not kinked, Warning ■ squashed, altered or cut through. Danger of death! The mains cable does not come into There is a risk of electric shock if you ■... -
Page 50: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time E.g. when moving house The washing machine was thoroughly Caution! tested before leaving the factory. To Risk of damage to the appliance remove any water that may be left over caused by detergent/fabric softener from the test, run the first wash cycle leaking from the dispensers. -
Page 51: Aqua-Stop Warranty
Aqua-Stop warranty Installing the transport braces: Aqua-Stop warranty Remove the covers and keep them in a safe place. Only for appliances with Aqua-Stop Use a screwdriver if necessary. A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance... - Page 52 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001095417* 9001095417 (9503)