Page 2
Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in water containing detergent. To be operated with cold mains ■...
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning.
Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves.
Environmental protection Energy-saving mode: The display ■ Environmental panel lighting goes out after a few minutes and the Ü button flashes. protection Press any button to activate the lighting. Packaging/used appliance Energy-saving mode is not activated E n v i r o n m e n t a l p r o t e c t i o n if a programme is running.
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button.
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 21 Operating/display panel Door with door handle 9S Open the door...
Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 19 need to be pressed lightly. Temperature (Temp. °C), ■ Spin speed (Spin 0), ■...
Getting to know the appliance Display panel Further information Programme progress: Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g. to reload laundry Default programme settings: ( Temperature in °C Washing machine door: Ž...
Laundry Some examples of soiling levels can Laundry be found on ~ Page 14 – Light: Do not prewash, select the P repare the laundry speedPerfect G setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is suit- Temperature that can be selected (Ž...
Page 16
Overview of programmes Programme/type of laundry/information Settings Delicates / Silk Max. 2 kg For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves) $ - 800 rpm Use a detergent suitable for machine-washing delicates or Note: ecoPerfect ¦, speedPerfect G, silk.
Page 17
Overview of programmes Programme/type of laundry/information Settings *** Hygienic Max. 7 kg/5* kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: Particularly suited to washing items that need to be hygien- $ - 1600** rpm ically clean and especially kind to sensitive skin thanks to the long- ecoPerfect ¦, speedPerfect G, er wash cycle at a defined temperature, higher water level and longer spin cycle.
Overview of programmes Programme/type of laundry/information Settings *** Quilts Max. 2.5 kg Machine-washable items stuffed with synthetic fibres, such as pil- Ž - 60 °C lows, quilts and bedspreads; also suitable for items stuffed with $ - 1200 rpm down ecoPerfect ¦, speedPerfect G, Note: Wash large items separately.
Programme default settings Finish in Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in hourly increments The default programme settings are (h = hour) up to a maximum of P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after 24 hours.
Additional programme settings Additional programme Operating the settings appliance Preparing the washing An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s O p e r a t i n g t h e a p p l i a n c e which can be selected depending on machine...
Operating the appliance The maximum load and the duration Measure and add detergent ■ of the programme (alternately) and care products In appliances with a drum light: Caution! The drum is lit after switching on the Damage to the appliance appliance, after opening and closing the Cleaning agents and agents for pre- door and after starting the programme.
Operating the appliance Pour the detergent and care products For models without a measuring aid, into the appropriate compartments: pour the liquid detergent into the appropriate dispenser and place it in the drum. Change the programme default settings You can use or change the default settings for this washing cycle.
Operating the appliance Start the programme Adding laundry Press the Ü button. The indicator lamp After starting the programme, you can lights up and the programme starts. add or remove laundry if necessary. The display panel shows the "Ready in" Press the Ü...
Operating the appliance Cancel the programme Removing laundry/switching off the appliance For programmes at high temperatures: Press the Ü button. Open the door and remove the To cool down laundry: Select Rinse. laundry. Press the Ü button. Press the # button. The appliance is switched off.
Appliance settings Changing the signal volume Appliance settings Use the Finish in + or - button to You can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and ■...
Sensors Sensors Cleaning and maintenance A utomatic load sensing S e n s o r s Warning Depending on the type of fabric and C l e a n i n g a n d m a i n t e n a n c e Danger of death! load, the automatic load sensing There is a risk of electric shock if you...
Cleaning and maintenance Machine housing/control Detergent drawer and housing panel If the washing machine contains detergent or fabric softener residues: Wipe the housing and the control ■ Pull out the detergent drawer. Press panel with a soft, damp cloth. down the insert and fully remove the Remove the detergent residue ■...
Cleaning and maintenance The drain pump is blocked, emergency draining Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be Place the service flap back on, lock it into place, and close it.
Faults and what to do about them. Filter in the water supply Faults and what to do blocked about them. First, reduce the water pressure in the Emergency release supply hose: F a u l t s a n d w h a t t o d o a b o u t t h e m . Turn off the tap.
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the Ü...
Page 32
Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half of the amount of detergent recommended by the detergent manufacturer.
After-sales service After-sales service If you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Additional Load Energy Water Programme function...
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:...
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine.
Positioning and connecting Installing the appliance in a Keep the screws and sleeves in Note: a safe place. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate.
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx.
Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components.
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement".
Positioning and connecting Before washing for the first Transportation time E.g. when moving house The washing machine was thoroughly Preparatory work: Turn off the tap. tested before leaving the factory. In Reduce the water pressure in the order to remove any water which may supply hose: ~ Page 29;...
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
Page 44
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001075622* 9001075622 (9503)