JVC GY-HM600E Instructions Manual page 118

L Shutter
The current shutter speed is displayed when
0
the shutter is set to "On".
(A P93 [ Shutter ] )
a is displayed when the [FULL AUTO] switch
0
is set to "ON" to enable Full Auto shooting
mode, or when the [SHUTTER] button is
pressed to enable automatic shutter mode.
Memo :
The variable range of the shutter speed varies
0
according to the video format settings.
(A P53 [Setting the Electronic Shutter] )
Displayed in the Display 0 screen only when
0
there is a change.
If the shutter speed is not displayed, the shutter
0
is OFF.
M Iris F-Number
Displays F-number of the lens iris.
N Gain
Displays the gain value.
0
a is displayed in the ALC mode during
0
Manual shooting.
Z is displayed when AE LOCK is set to "ON".
0
"LUX30" or "LUX36" is displayed when in the
0
low-light shooting mode.
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
O AE Level
Appears when the AE function is activated,
0
and [Main Menu] B [Camera Function] B
[AE Level] is set to a value other than
"Normal".
(A P93 [ AE Level ] )
When operated while manual operation is
0
disabled, "AE" blinks for about 5 seconds.
When face detection is enabled and [Face
0
Detect] is set to "AF&AE", q appears on the
left side of "AE".
(A P49 [Adjusting the Focusing by Face
Detection] )
118
P ND Filter Position
Displays the current ND filter position.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [ND Filter] is
set to "Off".
(A P103 [ ND Filter ] )
Displayed in the Display 0 screen only when
0
there is a change.
Q Focus Display
Displays the value of the focal length during
0
manual focus.
e is displayed during Auto Focus.
0
When face detection is enabled, q appears
0
on the left side of e.
(A P49 [Adjusting the Focusing by Face
Detection] )
(A P95 [ Face Detect ] )
Memo :
You can specify whether to display the focus
0
value ("Feet"/"Meter") or turn off the display in
[Main Menu] B [LCD/VF] B [Display Settings]
B [Focus].
This item will not be displayed when "Off" is
selected.
(A P103 [ Focus ] )
Displayed in the Display 0 screen only when
0
there is a change.
R Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
When ACCU-Focus is enabled, "ACCU-
0
FOCUS" blinks for about 10 seconds while
Focus Assist starts up, after which the
"FOCUS" indicator lights up.
If recording starts while [ACCU-Focus] is
0
active, [ACCU-Focus] will be forcibly
deactivated.
(A P102 [ Focus Assist ] )
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
S Luminance Information
Displayed when the Spot Meter function is
activated.
(A P68 [Setting Spot Meter] )
MAX : Maximum luminance
MIN : Minimum luminance