INFO (Initialize all settings not related to the network)
2)
NET INFO (Initialize network related settings)*
INITIALIZE
CANCEL (Do not initialize) (default)
2)
Initializing this unit also initializes measurement results with IntelliBeam and settings stored in system memory. Perform "AUTO SETUP" from the "IntelliBeam" menu again (p. 32).
Settings/Adjustable range
Confirm firmware version/update firmware.
Reset the parameters of this unit to the factory presets. When the unit freezed, the problem may solve by
restoring to their default values.
* The following configurations will be restored if "INFO" is selected.