Display Setting - Yamaha BD-A1010 Owner's Manual

IP Setting
You can configure the network settings.
Auto* Select to automatically configure the network
settings of this Player with the DHCP server.
Manual
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Hints
– Numeric keys Enters characters.
– 2/3
Moves the highlight.
– CLEAR Deletes a character.
– ENTER Saves the settings and exits from
the menu.
*
Auto , Manual
BD-Live Connection
You can set access restriction to BD-Live contents.
Permitted Allows all BD-Live discs to connect the network.
Partial Allows only discs with owner certification.
*
Permitted
Prohibited
Prohibits all BD-Live discs to connect the network.
DLNA
You can set the DLNA (p. 21) to Enable/Disable. When
you do not use the DLNA function, set to Disable.
*
Enable , Disable
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Set to Enable to set the proxy setting.
Enable Enables proxy host and proxy port setting.
* Sets proxy server to disable. Select this item when
Disable
proxy server is not used.
Proxy Host Sets proxy host.
Proxy Port
Sets proxy port.

■ Display Setting

The default settings are marked with "
TV
3D Output
You can select 3D or 2D video output from this Player.
Auto*
This Player automatically selects 3D or 2D videos.
Off
This Player always selects 2D videos.
Note
– Even if you set "3D Output" to "Auto" and play
back a Blu-ray 3D disc, this Player selects 2D
images depending on the connection and the setting
of TV, etc (p. 12).
TV Screen
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
16:9 Full
16:9 Normal
4:3 Pan Scan Select this when this Player is connected to a TV
4:3 Letterbox Select this when this Player is connected to a TV
image size
image size
Resolution
You can select the video output resolution from Auto,
480i/576i, 480p/576p, 720p, 1080i, and 1080p. When set
to Auto, resolution is set to the maximum resolution
according to the connected TV. For more details on output
formats, refer to "About the video output formats" (p. 37).
".
*
Auto
Note
– To output HD audio (such as Dolby TrueHD or
Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
* Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
On 16:9 (wide screen) TV
Original
16:9 Full
4:3
Original
4:3 Pan Scan
16:9
*
, 480i/576i, 480p/576p, 720p, 1080i, 1080p
DTS-HD Master Audio) from HDMI terminal, set
Resolution to Auto or more than 720p.
SETUP MENU
16:9 Normal
On 4:3 TV
4:3 Letterbox
33
En
4