D-Link DIR-822 User Manual page 120

DIR-822 AC1200 Wi-Fi Router
User Manual
In the IPv6 address assignment section, you can configure how clients from the LAN should
obtain IPv6 addresses.
Parameter
DHCP PD
Mode
Start IP
End IP
Leased Time
When all needed settings are configured, click the Apply button.
Figure 101. The section of IPv6 address assignment settings.
Select the checkbox to activate the Prefix Delegation function. When
the checkbox is selected, the router requests a prefix to configure
IPv6 addresses for clients of the LAN from a delegating router.
Select a mode of IPv6 address assignment from the drop-down list.
Stateless: clients themselves configure IPv6 addresses using the
prefix.
Stateful: the built-in DHCPv6 server of the router allocates
addresses from the range specified in the Start IP and End IP
fields.
Disable: clients' IPv6 addresses are assigned manually.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses provided to clients. The field is
available for editing, if the DHCP PD checkbox is not selected.
Page 120 of 212
Configuring via Web-based Interface
Description