DIR-822 AC1200 Wi-Fi Router
User Manual
Advanced
In this menu you can configure advanced settings of the router:
create groups of ports for VLANs
•
enable the UPnP IGD protocol
•
configure autonegotiation or manually configure speed and duplex mode for each Ethernet
•
port of the router
setup the rate limit for traffic transmitted from every port of the router
•
configure notifications on the reason of the Internet connection failure
•
configure a DDNS service
•
add name servers
•
define static routes
•
create rules for remote access to the web-based interface
•
allow
the
•
PPPoE/PPTP/L2TP/IPSec pass through functions
configure TR-069 client
•
configure VPN tunnels based on IPsec protocol.
•
router
to
use
IGMP,
Page 151 of 212
Configuring via Web-based Interface
RTSP,
enable
the
SIP
ALG
function,