Display Set; Trigger Mode - Yamaha RX-A3060 Owner's Manual

X
You cannot assign both COAXIAL and OPTICAL jacks to the same input source.
⬛

Display Set

Configures the settings related to the front display and TV screen display.
Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Y
The front display may become dark when "ECO Mode" (p.150) is set to "On".
Short Message
Selects whether to display short messages on the TV screen when the unit is operated (such as
input selection and volume adjustment).
Settings
On Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
Piano Displays the piano image on the TV screen when there is no video signal.
Gray Displays a gray background on the TV screen when there is no video signal.
⬛
Trigger Output1, Trigger Output2
Sets the TRIGGER OUT 1-2 jacks to function in sync with the power status of each zone or input
switching.

Trigger Mode

Specifies the condition for the TRIGGER OUT jack to function.
Settings
The TRIGGER OUT jack functions in sync with the power status of the zone
Power
specified with "Target Zone".
The TRIGGER OUT jack functions in sync with the input switching in the zone
specified with "Target Zone".
Source
An electronic signal is transmitted according to the setting made in "Source".
Select this to manually switch the output level for electronic signal transmission
Manual
with "Manual".
Source
Specifies the output level of the electronic signal transmitted with each input, switching when
"Trigger Mode" is set to "Source".
Choices
AV 1-7, V-AUX, AUDIO 1-3, PHONO, TUNER, (network sources), Bluetooth, USB
Settings
Stops the electronic signal transmission when you switch to the input source
Low
specified in this option.
Transmits the electronic signal when you switch to the input source specified in
High
this option.
Manual
Switches the output level for electronic signal transmission manually when "Trigger Mode" is
set to "Manual". This setting can also be used to confirm proper function of the external device
connected via the TRIGGER OUT jack.
Choices
Low Stops the electronic signal transmission.
High Transmits the electronic signal.
148
En