Philips DPM8000 Technical Documentation Manual page 32

To the right of the radio buttons, a picture related to the currently selected radio button is displayed.
Here you can configure the Foot Control operation for the followings:
Dictate
In this operating mode, you can control the dictation functions with the Foot Control to keep your
hands free for your work.
1. Connect the plug of the Foot Control to the Foot Control socket of the docking station.
2. Set the switch on the underside of the Foot Control to the T position.
3. Place the Digital Pocket Memo into the docking station. A Foot Control icon is displayed on
the screen.
4. Press the middle pedal of the Foot Control to enter Record standby mode. To start
recording, press the right pedal of the Foot Control. For short pauses, press the right pedal
of the Foot Control again. To continue recording, press the right pedal of the Foot Control
again.
5. To stop recording, press the left pedal of the Foot Control. To continue recording, repeat
step 4.
6. Press and hold the left pedal of the Foot Control for fast rewind. When rewinding reaches
the desired position, release the pedal.
7. When recording is stopped, press the right pedal of the Foot Control to start playback. Press
the right pedal of the Foot Control again to stop playback.
Notes:
The right pedal can be configured via a switch on the back side of the foot pedal to either Normal- or
Toggle-mode.
Double click the left pedal of the Foot Control during recording to finish/lock (EOL) the current
recording and create a new file.
Transcribe
In this operating mode, you can control the transcription functions with the Foot Control to keep your
hands free for your work.
1. Connect the plug of the Foot Control to the Foot Control socket of the docking station.
The foot control has three pedals, from left to right: fast rewind, fast forward and playback.
2. Press and hold the left pedal for fast rewind.
When rewinding reaches the desired position, release the pedal.
3. Press and hold the middle pedal to fast forward.
When forwarding reaches the desired position, release the pedal.
4. Press the right pedal to start playback.
The behavior for starting and stopping playback depends on the setting of the playback
switch on the underside of the foot control:
N (Neutral) position: Press and hold the right pedal for playback. When the pedal is released,
playback is stopped.
T (Toggle) position: Press and release the right pedal to start continuous playback.
Press the right pedal again to stop playback.
Page 32 DPM 8000 series - Technical Specification and Advanced Device Configuration