Device Security Settings - Philips DPM8000 Technical Documentation Manual

Note:
If you have changed your master password, make sure you transfer the changes before using it for
encryption.

3.6.2. Device security settings

By setting the PIN and PUK codes, you can protect the recorder itself by prohibiting others from
turning the device on.
3.6.2.1. PIN activate
Here you can set the PIN code for the recorder device.
The following options can be defined for PIN code usage:
At power-on (if PIN code is set):

The PIN code must be entered when turning on the recorder.

At power-on and after inactivity period has elapsed (if PIN code is set): The PIN code must
be entered when turning on the recorder and when the specified time during which no action
has been taken with the device has elapsed. Possible values for the inactivity period range
between 1-99 minutes.
PIN protected device will be not recognized on USB before you type the right PIN Code.
All the dictation files can be transferred to the PC with external SD-Card reader.
3.6.2.2. PIN deactivate
Clear the PIN code field and Confirm PIN code field areas and click on OK.
You see the Warning Message, click on YES and your Device is open.
Page 37 DPM 8000 series - Technical Specification and Advanced Device Configuration