Summary of Contents for D-Link xStack DGS-3610 Series
Page 1
DGS-3610 Series Hardware Installation Guide Version 1.2...
Page 2
D-Link Corporation reserves all copyrights of this document. Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of D-Link Corporation is prohibited. Exemption statement This document is provided “as is”.
Preface Thank you for using our switches. This manual provides you with detailed operation guide that allows you to easily install and use the switches. Scope This manual describes the functions and physical features of the switches, and provides the installation procedures, troubleshooting...
Documentation CD-ROM: The documentation of D-Link switches is stored in the CD-ROM package, which is provided to you together with the product you purchase. The CD-ROM is updated frequently, and may be more current than the printed documents. Obtaining Technical Assistance D-Link Corporation provides excellent technical support services for all our products.
Product Overview The DGS-3610 series is a new generation of 10G multi-layer chassis switch developed by D-Link that features high performance, high-security, intelligence and ease of use. The DGS-3610 switch provides flexible media interfaces, which accommodate various media for connection in networking. In addition, this series can be flexibly expanded with various 10G modules to offer high expandability and meet the needs for large bandwidth.
Chapter 1 Product Overview DGS-3610 Series H/W Installation Guide Upgrade to the 10G uplink backbone network by simply adding 10G modules for protecting user investment; Scenarios where numerous 1000M ports are needed to provide high-performance data processing; High-performance multi-layer switching solutions;...
Page 9
DGS-3610 Series H/W Installation Guide Chapter 1 Product Overview In order to ensure the security of devices, prevent hackers’ attack and control devices, SSH (Secure Shell) and SNMPv3 can encrypt management information in the process of Telnet and SNMP; ...
Chapter 1 Product Overview DGS-3610 Series H/W Installation Guide Supporting smooth upgrade to the 10G backbone by simply adding various 10G modules to meet flexible expansion and high bandwidth transmission needs; SNTP can ensure the exact timing of switch and can keep the same with time server. It is convenient to manage the analysis and diagnosis of journal data and flow data;...
Page 12
Chapter 1 Product Overview DGS-3610 Series H/W Installation Guide 802.1Q VLAN Standard IP ACL (IP address based hardware ACL) Extended IP ACL (IP address based and TCP/UDP port number based hardware ACL) MAC extended ACL (source MAC address based, destination MAC address based and optional Ethernet type based hardware ACL) Time-based ACL Expert level ACL (hardware ACL based on the flexible combinations of...
Chapter 1 Product Overview DGS-3610 Series H/W Installation Guide Storage temperature -40º C - 70º C Operating humidity: 10% ~ 90% RH Humidity Storage humidity: 5% - 90% RH Product Appearance Figure 1-1 Appearance of the DGS-3610-26 Figure 1-2 Appearance of the DGS-3610-26G Figure 1-3 Appearance of the DGS-3610-50P...
Page 15
DGS-3610 Series H/W Installation Guide Chapter 1 Product Overview Table 1-4 LEDs on the Front Panel Identification Applicable Model Description Detailed Information OFF: The switch is not powered on. Flashing Green: switch DGS-3610-26 initializing. If it keeps flashing, there is ...
Chapter 1 Product Overview DGS-3610 Series H/W Installation Guide Item Status Description Orange flashing 10/100M ACT Table 1-6 Identifications on the Backplane Identification Description Detailed Information 10G extended port of the switch, to be used with our 10G extended port 1 DEM-412X and DEM-412CX extension modules for providing the switch with 10G port or stack port.
Chapter 2 Installation DGS-3610 Series H/W Installation Guide Installation Prior Preparation This switch is already prepared for installation at delivery. Before connecting the power supply and the network, please check all the accessories against the packing list in the packaging carton. Read the installation instructions carefully before you power on the system.
DGS-3610 Series H/W Installation Guide Chapter 2 Installation Figure 2-1 Schematic Diagram for Installing the Handle The above figure shows the schematic diagram for installing the handle on the switch. There are eight screw holes on the handle. Align the handle with the screw holes on the side wall of the switch and tighten the sunk screws.
Chapter 2 Installation DGS-3610 Series H/W Installation Guide Figure 2-2 Schematic Diagram for Installing the L-Shaped Fastening Bracket Fasten the switch onto the rack, as shown in the following diagram. You should Step 2 prepare the screws needed for rack mounting by yourself. Figure 2-3 Schematic Diagram for Fastening the Switch Please ensure that the ventilation holes and fans on both sides and at the back of the chassis are not blocked.
DGS-3610 Series H/W Installation Guide Chapter 2 Installation switch. When you plug the RJ-45 connector, you should hear a “click”, which means that the connector is plugged tightly. Do not insert a phone connector into the RJ-45 port, as this may damage the switch.
Chapter 2 Installation DGS-3610 Series H/W Installation Guide You must use the 3-pin power socket with a ground end, and the distance between the power socket and the switch should be no more than 1.8 m. For more reliable grounding, ground the grounding terminal at the rear Caution panel of the switch.
Common Troubleshooting Procedures Symptom Possible Cause Solution Forgetting the management Please contact the D-Link Customer interface login password Service Department for technical support. Verify that the power socket in the The power supply does not work; The status LED does not...
DGS-3610 Series H/W Installation Guide Appendix A Connectors and Connection Media Connectors and Connection Media 1000BASE-T/100BASE-TX/10BA SE-T Port The 1000BASE-T/100BASE-TX/10BASE-T is a port that supports adaptation of three rates, and automatic MDI/MDIX Crossover at these three rates. The 1000BASE-T complies with IEEE 802.3ab, and uses the cable of 100-ohm Category-5 or Supper Category-5 UTP or STP, which can be up to 100 m.
Appendix A Connectors and Connection Media DGS-3610 Series H/W Installation Guide Figure A-3 shows the connections of the straight-through and crossover twisted pairs of the 100BASE-TX/10BASE-T. Figure A-3 Connections of the Twisted Pairs of the 100BASE-TX/10BASE-T Crossover Straight-Through Optical Fiber Connection For the optical fiber ports, select single-mode or multiple-mode optical fibers for connection according to the fiber module connected.