Viewing Logged Data And Status - GE Moisture monitor series 3 Programming Manual

Viewing Logged Data and
Status
Advanced Programming
Data Logging
SETUP [VIEW]
View Data Log
[STATUS] DATA
If you selected STATUS:
Storage: Internal
# Bytes Free: 65269
# Bytes Used: 839
Records: 78
Rem: 23:46:44
To view data, refer back to the "View Data Log" option above in the
Data Logging menu. If you are done, skip to page 3-22.
If you selected DATA:
Searching . . .
Log Started at:
10/3/00 14:33
TIME CH1:02%:
14:36:55 ERR01
Use the following keys to view data:
•
Use the arrow keys to scroll to the desired measurement parameter
to view (e.g., temperature, oxygen).
• [1]
Use the key to view the next measurement taken at the specified
interval (e.g., move from the measurement logged at 17:35 to the
measurement logged at 17:36).
• [3]
Use the key to scroll to the previous measurement recorded at
the specified interval (e.g., move from measurement logged at 4:01
to the measurement logged at 4:00).
• [NO]
Press to end viewing data. To view the status, refer back to
Step 2. If you are done, proceed to page 3-22.
1 Use the arrow keys to select
VIEW and press
[YES]
1
Use the arrow keys to move the
brackets to one of the selections
[YES]
and press .
The log status will display each
of the following screens for two
seconds before returning to the
Data Logging menu.
The MMS-3 displays data similar
to the following:
March 2008
.
3-21